Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 26 replies
  • Subscribers 32 subscribers
  • Views 3469 views
  • Users 0 members are here
Options
You may also be interested in
This discussion is locked.
You cannot post a reply to this discussion. If you have a question start a new discussion

Manufacterer's advice/instructions

whjohnson
Been asked to connect up a used rangemaster all-electric cooker. No rating plate but model name is 'classic 90'. It has an induction hob.

Existing cable is 6.00mm on a 32A mcb.

Phoned the manufacturer who said it would be fine, since diversity could be applied but we would have to fit a cooker switch without a built in 13a socket and uprate the mcb to 40A.

I am a little troubled to say the least.

Comments welcome.
Parents
  • 0
    I agree - hence my doubts.

    The unit is 2nd hand and no paperwork came with it apparently. Not sure now if the hob bit is ceramic or induction. The model does not seem to come up on Rangemaster's website.so it must have been superceeded.

    All I do know for sure is that it is a 900mm model and is all-electric.
Reply
  • 0
    I agree - hence my doubts.

    The unit is 2nd hand and no paperwork came with it apparently. Not sure now if the hob bit is ceramic or induction. The model does not seem to come up on Rangemaster's website.so it must have been superceeded.

    All I do know for sure is that it is a 900mm model and is all-electric.
Children
No Data

Join us to get the best from IET EngX.

Joining EngX lets you personalise your experience so you stay up to date on the topics that interest you, plus you’ll be able to make connections who are looking to collaborate, exchange ideas and more.

Join us Not now

Community Rules & Guidelines