Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 26 replies
  • Subscribers 32 subscribers
  • Views 3483 views
  • Users 0 members are here
Options
You may also be interested in
This discussion is locked.
You cannot post a reply to this discussion. If you have a question start a new discussion

Manufacterer's advice/instructions

whjohnson
Been asked to connect up a used rangemaster all-electric cooker. No rating plate but model name is 'classic 90'. It has an induction hob.

Existing cable is 6.00mm on a 32A mcb.

Phoned the manufacturer who said it would be fine, since diversity could be applied but we would have to fit a cooker switch without a built in 13a socket and uprate the mcb to 40A.

I am a little troubled to say the least.

Comments welcome.
Parents
  • Former Community Member
    0 Former Community Member
    I fear that the problem is that one-upmanship encourages the manufacturers to declare the maximum possible power. However, it is perfectly reasonable for them to specify a smaller cable in the small print than may otherwise be expected.


    And conversely, when I was doing a lot of pub PIRs (as they were at the time), it was quite usual to find an innocent looking twin basket deep fat fryer with two 13 A plugs prefitted when it was actually one appliance. The landlord saw nothing wrong with plugging it into the nearest double socket with the consequence of there being less than 3 kW left on the rfc in a very busy kitchen........


    Regards


    BOD
Reply
  • Former Community Member
    0 Former Community Member
    I fear that the problem is that one-upmanship encourages the manufacturers to declare the maximum possible power. However, it is perfectly reasonable for them to specify a smaller cable in the small print than may otherwise be expected.


    And conversely, when I was doing a lot of pub PIRs (as they were at the time), it was quite usual to find an innocent looking twin basket deep fat fryer with two 13 A plugs prefitted when it was actually one appliance. The landlord saw nothing wrong with plugging it into the nearest double socket with the consequence of there being less than 3 kW left on the rfc in a very busy kitchen........


    Regards


    BOD
Children
No Data

Join us to get the best from IET EngX.

Joining EngX lets you personalise your experience so you stay up to date on the topics that interest you, plus you’ll be able to make connections who are looking to collaborate, exchange ideas and more.

Join us Not now

Community Rules & Guidelines