Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 17 replies
  • Subscribers 32 subscribers
  • Views 2157 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Seperate spurs for boiler and underfloor heating.

hertzal123
The customer asked for 2 spurs  in the boiler cupboard for the above.The uf heating engineer now wants to fire the combi boiler via voltage free contacts from his room stat and controls.

My thoughts are there should be 1 spur for both boiler and ufh.Or there could be signage to isolate both supplies before working .Any Thoughts?

                                                                                                                                                                                                                              Regards,Hz
Parents
  • Former Community Member
    0 Former Community Member
    If it's feasible, i would have 1 spur supply ing both, but if they're located far away from each other, then the second option may be your only option.
Reply
  • Former Community Member
    0 Former Community Member
    If it's feasible, i would have 1 spur supply ing both, but if they're located far away from each other, then the second option may be your only option.
Children
No Data

Community Rules & Guidelines