Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 17 replies
  • Subscribers 27 subscribers
  • Views 1134 views
  • Users 0 members are here
Options
You may also be interested in
This discussion is locked.
You cannot post a reply to this discussion. If you have a question start a new discussion

Seperate spurs for boiler and underfloor heating.

hertzal123
The customer asked for 2 spurs  in the boiler cupboard for the above.The uf heating engineer now wants to fire the combi boiler via voltage free contacts from his room stat and controls.

My thoughts are there should be 1 spur for both boiler and ufh.Or there could be signage to isolate both supplies before working .Any Thoughts?

                                                                                                                                                                                                                              Regards,Hz
Parents
  • 0
    When you say 'spur' are you correctly referring to a branch cable, or are you wrongly meaning a Fused Connector Unit - which is a frequent mistake committed by those who should know better?


    Therefore, two spurs from one FCU would be alright.
Reply
  • 0
    When you say 'spur' are you correctly referring to a branch cable, or are you wrongly meaning a Fused Connector Unit - which is a frequent mistake committed by those who should know better?


    Therefore, two spurs from one FCU would be alright.
Children
No Data

Join us to get the best from IET EngX.

Joining EngX lets you personalise your experience so you stay up to date on the topics that interest you, plus you’ll be able to make connections who are looking to collaborate, exchange ideas and more.

Join us Not now

Community Rules & Guidelines