This discussion is locked.
You cannot post a reply to this discussion. If you have a question start a new discussion

Shock Likelihood at Switch.

Mornin' All,


I have just inspected and tested a renovated  old flat's wiring. The original lighting wiring in places has no circuit protective conductor. The owner has installed metal plate light switches to two positions with wooden back boxes. At these two positions there is no circuit protective conductor. The flat has a new R.C.B.O. consumer unit and all other wiring is good.


I have recommended that the switches have a C.P.C. installed (difficult and disruptive) or be changed to all insulated types.


Just what is the shock risk at these two switch positions? What is the likelihood of the metal plates becoming live due to a fault? Has anyone every seen a metal plate switch break down so that the plates becomes live?


Thanks,


Z.

Parents
  • "The customer emailed me to say they had paid me and enquired if they could put the old metal light fitting back up now I had finished. Sometimes you just can’t make it up!"


    That sounds entirely credible to me I`m afraid.


    Yer does yer best but you are still banging yer heed agin a brick wall

Reply
  • "The customer emailed me to say they had paid me and enquired if they could put the old metal light fitting back up now I had finished. Sometimes you just can’t make it up!"


    That sounds entirely credible to me I`m afraid.


    Yer does yer best but you are still banging yer heed agin a brick wall

Children
No Data