Wiring diagram

alanblaby:

Clint:

Anyone out there with a great mind for heating systems, care to draw me a wiring diagram ?

There is a

-warm flow oil boiler 

-Immersion 

-pipe stat 

-UFH Valve

-Manifold(8 zones)

-Hot water valve

-Hot water circulation 

-Towel warmer valve (stat is what’s on the towel rail)

-Upstairs heating valve

-2 x 2 channel Honeywell programmer

-1x 1 channel Honeywell programmer

-1x stat for upstairs radiators

-stat for each ufh zone 

Its a S Plan + system you want.

Disregard the boiler, as all that'll need is a Live and switched live feed, probably.

Immersion is totally separate.

Pipe Stat - presumably a Frost stat? Clarification needed.

UFH Valve, just one of the S+ valves.

Manifold, should be straightforward, the manufacturers install details will tell you what to do, possibly has 8 floor/room stats?

Towel warmer valve? Never heard of that, and seems to be a strange choice to me,is the towel rail really getting its own S valve? Surely an electric 250watt element woudl be far better. If there is a separate valve for it, then its just another S+ valve. All easily wired in.

Hot water valve and circulation, one S valve on the S+ system and the pump.

Upstairs heating valve. Just another S valve.

2 Programmers, presumably one for the CH and hot water, one for the UFH. Why not just one 3 channel programmer?

Stats, whether room or floor. One for each zone. So, upstairs and downstairs CH, each area of the UFH, but they may be included in the manifold kit.

You will definitely need a water tank stat. And a pair of 2G connection boxes. One may suffice, but it'll be tight.

 

 

alanblaby:

Clint:

Anyone out there with a great mind for heating systems, care to draw me a wiring diagram ?

There is a

-warm flow oil boiler 

-Immersion 

-pipe stat 

-UFH Valve

-Manifold(8 zones)

-Hot water valve

-Hot water circulation 

-Towel warmer valve (stat is what’s on the towel rail)

-Upstairs heating valve

-2 x 2 channel Honeywell programmer

-1x 1 channel Honeywell programmer

-1x stat for upstairs radiators

-stat for each ufh zone 

Its a S Plan + system you want.

Disregard the boiler, as all that'll need is a Live and switched live feed, probably.

Immersion is totally separate.

Pipe Stat - presumably a Frost stat? Clarification needed.

UFH Valve, just one of the S+ valves.

Manifold, should be straightforward, the manufacturers install details will tell you what to do, possibly has 8 floor/room stats?

Towel warmer valve? Never heard of that, and seems to be a strange choice to me,is the towel rail really getting its own S valve? Surely an electric 250watt element woudl be far better. If there is a separate valve for it, then its just another S+ valve. All easily wired in.

Hot water valve and circulation, one S valve on the S+ system and the pump.

Upstairs heating valve. Just another S valve.

2 Programmers, presumably one for the CH and hot water, one for the UFH. Why not just one 3 channel programmer?

Stats, whether room or floor. One for each zone. So, upstairs and downstairs CH, each area of the UFH, but they may be included in the manifold kit.

You will definitely need a water tank stat. And a pair of 2G connection boxes. One may suffice, but it'll be tight.