This discussion is locked.
You cannot post a reply to this discussion. If you have a question start a new discussion

Wiring diagram

Former Community Member
Former Community Member
Anyone out there with a great mind for heating systems, care to draw me a wiring diagram ?


There is a

-warm flow oil boiler 

-Immersion 

-pipe stat 

-UFH Valve

-Manifold(8 zones)

-Hot water valve

-Hot water circulation 

-Towel warmer valve (stat is what’s on the towel rail)

-Upstairs heating valve

-2 x 2 channel Honeywell programmer

-1x 1 channel Honeywell programmer

-1x stat for upstairs radiators

-stat for each ufh zone 


Any advice on what I can use to get this all linked together, currently looking at S plan but I feel someone with experience with similar system  may give some better guidance 


Clint



Parents

  • but no TRV. You wouldn't want them all to close, would you? 



    I gather the modern approach is indeed to TRV everything (or otherwise turn off the heat emitters when local temperatures are adequate) - and then if the system doesn't have the wit to shutdown the boiler and/or reduce the pump speed you have an auto by-pass valve across the boiler flow & return.


      - Andy.
Reply

  • but no TRV. You wouldn't want them all to close, would you? 



    I gather the modern approach is indeed to TRV everything (or otherwise turn off the heat emitters when local temperatures are adequate) - and then if the system doesn't have the wit to shutdown the boiler and/or reduce the pump speed you have an auto by-pass valve across the boiler flow & return.


      - Andy.
Children
No Data