This discussion is locked.
You cannot post a reply to this discussion. If you have a question start a new discussion

Wiring diagram

Former Community Member
Former Community Member
Anyone out there with a great mind for heating systems, care to draw me a wiring diagram ?


There is a

-warm flow oil boiler 

-Immersion 

-pipe stat 

-UFH Valve

-Manifold(8 zones)

-Hot water valve

-Hot water circulation 

-Towel warmer valve (stat is what’s on the towel rail)

-Upstairs heating valve

-2 x 2 channel Honeywell programmer

-1x 1 channel Honeywell programmer

-1x stat for upstairs radiators

-stat for each ufh zone 


Any advice on what I can use to get this all linked together, currently looking at S plan but I feel someone with experience with similar system  may give some better guidance 


Clint



Parents

  • Sparkingchip:

    Perhaps someone should check the wiring and settings of the two stats.


    If the pipe stat is set to a higher temperature than the water in the return pipe reaches, even by just a degree or so, it will never turn off.




    Point is that it was blowing so very very cold. At one point, I couldn't get my east-facing office above 55 deg C. ?

Reply

  • Sparkingchip:

    Perhaps someone should check the wiring and settings of the two stats.


    If the pipe stat is set to a higher temperature than the water in the return pipe reaches, even by just a degree or so, it will never turn off.




    Point is that it was blowing so very very cold. At one point, I couldn't get my east-facing office above 55 deg C. ?

Children
No Data