Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 2 replies
  • Subscribers 32 subscribers
  • Views 274 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

IP rating of Proteus 3 phase board.ABX4S1/CD

hertzal123
The product data sheet for the above states"IP Rating IP 3X.Thought horizontal surfaces had to be 4X,

or is does that relate only to the installation work?

                                                                                 Regards,Hz
Parents
  • 0
    Well the requirement is IP4X or IPXXD. The latter would permit a 35mm opening through which a 1mm diameter wire should not make contact with live parts within 100mm. 

    Strange claim anyway because most boards are complete without any apertures other than screw fixing holes at the rear. I wonder is this a mistake and the claim was meant to be IPX3?
Reply
  • 0
    Well the requirement is IP4X or IPXXD. The latter would permit a 35mm opening through which a 1mm diameter wire should not make contact with live parts within 100mm. 

    Strange claim anyway because most boards are complete without any apertures other than screw fixing holes at the rear. I wonder is this a mistake and the claim was meant to be IPX3?
Children
No Data

Community Rules & Guidelines