Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 23 replies
  • Subscribers 27 subscribers
  • Views 7184 views
  • Users 0 members are here
Options
You may also be interested in
This discussion is locked.
You cannot post a reply to this discussion. If you have a question start a new discussion

Torque settings

Jam
Hi all,


Obviously, where available we use manufacturer's torque settings for connections. But where do they get them from?


I ask this not least because it's not always easy to obtain, at least in a timely fashion, but also because I appear to have conflicting instructions on some OEM'd equipment (comparing the original manufacturer with the wrapped supplier) or notably different settings when using the same lug onto a very similar terminal bar from a different supplier. It would also be helpful to be able to sense-check the answers for misplaced decimal points.


Jam
Parents
  • 0
    In many accessories such as those made by Hager and Schneider, particularly SFCU you have to do something to try and stop the small conductors from going up the side of the terminal screw.


    Andy Betteridge
Reply
  • 0
    In many accessories such as those made by Hager and Schneider, particularly SFCU you have to do something to try and stop the small conductors from going up the side of the terminal screw.


    Andy Betteridge
Children
No Data

Join us to get the best from IET EngX.

Joining EngX lets you personalise your experience so you stay up to date on the topics that interest you, plus you’ll be able to make connections who are looking to collaborate, exchange ideas and more.

Join us Not now

Community Rules & Guidelines