The IET is carrying out some important updates between 17-30 April and all of our websites will be view only. For more information, read this Announcement

This discussion is locked.
You cannot post a reply to this discussion. If you have a question start a new discussion

ever seen a blown cut-out fuse?

Perhaps I've had a sheltered upbringing, but it's occurred to me that I've never encountered a blown cut-out fuse (e.g. a BS1361 BS88-3). So have any of you seen one? How rare are they? Any interesting or salutatory tales to tell?
Parents
  • I have come across two blown main cut out fuses in domestic situations that I remember. The first in Milton Keynes. The customer had drilled through a ring circuit final cable buried in a wall. I don't know if the fuse was heavily loaded at the time, but it was winter and the time of day was evening.


    The second fuse that had blown was in Norfolk. Again this was due to a drilled through cable in a wall. I seem to remember that it was also a ring final 2.5mm2 T&E cable. This was in the late morning in a small family home.


    I renewed both fuses myself due to the urgency of the situation..


    Z.
Reply
  • I have come across two blown main cut out fuses in domestic situations that I remember. The first in Milton Keynes. The customer had drilled through a ring circuit final cable buried in a wall. I don't know if the fuse was heavily loaded at the time, but it was winter and the time of day was evening.


    The second fuse that had blown was in Norfolk. Again this was due to a drilled through cable in a wall. I seem to remember that it was also a ring final 2.5mm2 T&E cable. This was in the late morning in a small family home.


    I renewed both fuses myself due to the urgency of the situation..


    Z.
Children
No Data