Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 27 replies
  • Subscribers 32 subscribers
  • Views 2669 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Insulated tails used to supply flats

Former Community Member
Former Community Member
We have a block of flats completed in 2017 that have supplies to individual flats in insulated twin and earth.

These cables are fed from a switch fuse and then into a ceiling disappearing into the building fabric.

I no longer carry electrical regs books (Approved sparks but fire specialist) but I did flag up the poor way these cables were installed and questioned if they required a RCD as they were not in metal conduit of armoured cables as I normally see.

Was it not a requirement in a 2015 amendment that all cables such as this were protected/RCD?

Many thanks for taking the time to read.

Paul.
Parents
  • 0
    Untidy, so not good workmanship. I would check all the tails screws in each switchfuse, because I bet they are not tight, particularly as the ties were probably added after closing up! What does the EIC say, who is responsible, no reason not to publish it!
Reply
  • 0
    Untidy, so not good workmanship. I would check all the tails screws in each switchfuse, because I bet they are not tight, particularly as the ties were probably added after closing up! What does the EIC say, who is responsible, no reason not to publish it!
Children
No Data

Community Rules & Guidelines