The IET is carrying out some important updates between 17-30 April and all of our websites will be view only. For more information, read this Announcement

Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 98 replies
  • Subscribers 31 subscribers
  • Views 10849 views
  • Users 0 members are here
Options
You may also be interested in
This discussion is locked.
You cannot post a reply to this discussion. If you have a question start a new discussion

RCD socket outlet.

Former Community Member
Former Community Member
Hi all,
Any comments on this one most welcome!
A customer wants me to replace an existing one gang 13 amp socket outlet with a double.
The problem is that there's no rcd protection there, so i'm thinking that as I am in effect adding a socket outlet I should fit an rcd protected one?
If I were replacing like for like it wouldn't bother me at all but the fact it's going to be a double makes me think an rcd protected one is the thing to do, just seems a bit ott to fit one rcd protected socket when there are probably 20 others that aren't rcd'd!
Parents
  • 0
    Electricians are not taking any notice of this "regulation." These RCD sockets are life savers, the obvious protection for a Flymo. Whats next? banning those great little plug -in trips?


    I was talking to an electrician earlier today and he mentioned there is now a requirement to NOT bond pipes on a PME connection. We couldn't stop laughing!


    I said its as bad as that hairbrained idea from a couple of years ago where they said you must now have a metal (unearthed) fusebox on a TT system! 


    He said whatever next? EV chargers from a PME terminal. You couldn't make it up!


    Regards, UKPN.?



Reply
  • 0
    Electricians are not taking any notice of this "regulation." These RCD sockets are life savers, the obvious protection for a Flymo. Whats next? banning those great little plug -in trips?


    I was talking to an electrician earlier today and he mentioned there is now a requirement to NOT bond pipes on a PME connection. We couldn't stop laughing!


    I said its as bad as that hairbrained idea from a couple of years ago where they said you must now have a metal (unearthed) fusebox on a TT system! 


    He said whatever next? EV chargers from a PME terminal. You couldn't make it up!


    Regards, UKPN.?



Children
No Data

Join us to get the best from IET EngX.

Joining EngX lets you personalise your experience so you stay up to date on the topics that interest you, plus you’ll be able to make connections who are looking to collaborate, exchange ideas and more.

Join us Not now

Community Rules & Guidelines