Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 8 replies
  • Subscribers 32 subscribers
  • Views 872 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

SWA ref method

Farmboy
Hi all, a 6mm2, 3 core, XLPE SWA cable lays in a void under a bungalow ground floor (the sub floor is concrete, with 450mm stub walls, on which sits wooden floor joists and wayrock wooden flooring - the swa lays unclipped/loosely on that concrete floor). So, what reference method and ccc table should be used in apdx 4?


F.
Parents
  • 0

    Sparkingchip:

    Over sized ?


    Andy B




    Quite so (apparently it was always meant to be for just two outdoor twin sockets, with minimal load), cable was installed by others who didn't return (customer won't say why - he's part paid me for works to date so doubt it's because of non payment, unless it's because the other didn't get full payment, but time will tell). 


    F

Reply
  • 0

    Sparkingchip:

    Over sized ?


    Andy B




    Quite so (apparently it was always meant to be for just two outdoor twin sockets, with minimal load), cable was installed by others who didn't return (customer won't say why - he's part paid me for works to date so doubt it's because of non payment, unless it's because the other didn't get full payment, but time will tell). 


    F

Children
No Data

Community Rules & Guidelines