Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 8 replies
  • Subscribers 32 subscribers
  • Views 873 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

SWA ref method

Farmboy
Hi all, a 6mm2, 3 core, XLPE SWA cable lays in a void under a bungalow ground floor (the sub floor is concrete, with 450mm stub walls, on which sits wooden floor joists and wayrock wooden flooring - the swa lays unclipped/loosely on that concrete floor). So, what reference method and ccc table should be used in apdx 4?


F.
Parents
  • 0
    Why not use a 32-amp protective device?


    If you use a B16 MCB it could trip when some garden equipment is used, if you want to stick to a 16-amp MCB it will probably need to be a C16.


    Andy Betteridge
Reply
  • 0
    Why not use a 32-amp protective device?


    If you use a B16 MCB it could trip when some garden equipment is used, if you want to stick to a 16-amp MCB it will probably need to be a C16.


    Andy Betteridge
Children
No Data

Community Rules & Guidelines