Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 10 replies
  • Subscribers 32 subscribers
  • Views 5590 views
  • Users 0 members are here
Options
You may also be interested in
This discussion is locked.
You cannot post a reply to this discussion. If you have a question start a new discussion

Plywood backboard for BS EN61439-3 compliant consumer unit

George Frewin
Can a plywood backboard be used for mounting a BS EN61439-3 compliant consumer unit ?

The consumer unit itself is a non-combustible enclosure providing the cables are not rear entry through the plywood so I do not see an issue here but

there are mixed opinions on using such a scenario on other forums.
Parents
  • 0
    The existing consumer unit in question is going to be re-located onto a new stud wall hence the plywood backboard.


    Regards


    George
Reply
  • 0
    The existing consumer unit in question is going to be re-located onto a new stud wall hence the plywood backboard.


    Regards


    George
Children
No Data

Join us to get the best from IET EngX.

Joining EngX lets you personalise your experience so you stay up to date on the topics that interest you, plus you’ll be able to make connections who are looking to collaborate, exchange ideas and more.

Join us Not now

Community Rules & Guidelines