This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Obvious departures from the regulations at first glance at a new consumer unit.

I was asked to give an EICR on an domestic property which is to be placed on the market (part P applicable). I found that a builder as part of the other renovation work, (new doors, windows and kitchen etc.) has carried out the installation of a new metal consumer unit. On first opening this dual RCD unit, the 2 lighting circuits were on one R.C.D., and the 2 final ring circuits on the other R.C.D,, it was obvious also, that some wires to the new CB's were short and not lengthened, resulting in a bird's nest at the M.C.B.''s.


Plainly, a qualified electrician hadn't carried out the work. What would the readers as registered electricians have done ?. 1. Walk away. 2. Propose to have an E.I.C.R. carried out (UNSATISFACTORY), then carry out the rectification work and issue MWC's.3. Rectify the obvious departures, issue M.W.C.'s and then issue a SATISFACTORY E.I.C.R. 


Jaymack
Parents

  • I generally would not record it on an EICR as a non-compliance but would probably mention it in the Summary Section E box.



    Section E , in model forms, is for a summary that would include things that could impact on safety. So if something is of concern, it should have attracted a place in the Observations first. Personal preference should be expressed elsewhere, say, as an informative.
Reply

  • I generally would not record it on an EICR as a non-compliance but would probably mention it in the Summary Section E box.



    Section E , in model forms, is for a summary that would include things that could impact on safety. So if something is of concern, it should have attracted a place in the Observations first. Personal preference should be expressed elsewhere, say, as an informative.
Children
No Data