Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 18 replies
  • Subscribers 32 subscribers
  • Views 2984 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Band I / Band II cct separation

Farmboy
Does the principal of Band I / Band II  cct separation re 528.1 apply within equipment? A DETA mechanical chime with internal transformer has LV and ELV wiring right near each other within the same enclosure (the lid of which is easily removable without tools), which seems to moot the requirement to have them separated as per the reg?


F
Parents
  • 0
    I thought that had been answered, use sheathed 2 core 0.75 flex. I very much doubt that a din rail TX has ever been type tested in a CU, and can see no reason to do so. There are reasonable limits to apply here, read the type testing document and you will see why.
Reply
  • 0
    I thought that had been answered, use sheathed 2 core 0.75 flex. I very much doubt that a din rail TX has ever been type tested in a CU, and can see no reason to do so. There are reasonable limits to apply here, read the type testing document and you will see why.
Children
No Data

Community Rules & Guidelines