Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 11 replies
  • Subscribers 32 subscribers
  • Views 882 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

8 metre meter tails

Pete Murphy
Hello All,

Scenario is; conversion of basement with a 3P supply to 3 separate flats. TNCS. To get a new CU into the furthest flat I've proposed 25mm singles in Scottish Power red conduit. The conduit would be run in the correct zone in a void about 100mm above a plasterboard ceiling with no insulation at this point. I get the max current to 80A for this method and a fused switch would be installed at the origin after the DNO cut out Have I missed anything here? I'd assume to measure volt drop to the origin and disconnection times to the CU as per.

Thanks for your time,

Pete
Parents
  • 0
    Hello John,

    Apologies for the late reply. The meters and cutouts are all in the same position, one cupboard in the central flat currently being renovated. The developer wants to leave them there and extend through the conduit to CU's in the next flats,(which he'll rent out).

    Peter
Reply
  • 0
    Hello John,

    Apologies for the late reply. The meters and cutouts are all in the same position, one cupboard in the central flat currently being renovated. The developer wants to leave them there and extend through the conduit to CU's in the next flats,(which he'll rent out).

    Peter
Children
No Data

Community Rules & Guidelines