The IET is carrying out some important updates between 17-30 April and all of our websites will be view only. For more information, read this Announcement

This discussion is locked.
You cannot post a reply to this discussion. If you have a question start a new discussion

DIY Electric fencing - any thoughts?

Former Community Member
Former Community Member
So we have a fox problem and metal fencing all around the detached house, they come in and drop faeces everywhere and with a little child it is a safety issue really.


Is it possible to make a DIY electric fence (mains powered or through a 12V DC adapter supplied through an IP65 outdoor socket)?

I would look to run a seperate circuit for the outdoor socket for this purpose, but what should it be protected behind on a consumer unit - MCB / RCD / RCBO?


I guess at every instance of electrocution of the fox it would trip the circuit but I could accept a daily of trip protection if required.


Is there any legislation surrounding this?
Parents
  • Former Community Member
    0 Former Community Member
    Chris Pearson:


    As OMS says, a .22 will do the job nicely. Best if they are suppressed - don't want to upset the neighbours who feed them.


    Use subsonic ammo - the workings will be louder than the round - except for the "thump" of round on target of course


    OMS


     


Reply
  • Former Community Member
    0 Former Community Member
    Chris Pearson:


    As OMS says, a .22 will do the job nicely. Best if they are suppressed - don't want to upset the neighbours who feed them.


    Use subsonic ammo - the workings will be louder than the round - except for the "thump" of round on target of course


    OMS


     


Children
No Data