The IET is carrying out some important updates between 17-30 April and all of our websites will be view only. For more information, read this Announcement

Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 12 replies
  • Subscribers 31 subscribers
  • Views 2004 views
  • Users 0 members are here
Options
You may also be interested in
This discussion is locked.
You cannot post a reply to this discussion. If you have a question start a new discussion

Cable size

NGUACE
Hi all,


I am extending the lighting in my garden with no way of identifying the swa cable size? I have purchased some vernier callipers, measured the individual core to be 0.48, as there are 7 cores I work out the csa of the cable to be 1.26mm2.


Unfortunately depending on what table I look at, SWG, AWG, of which each seems to have a number of contradictory ones, I cannot confirm if it is 1mm2 or 1.5mm2.


the issue is I have spent days trying to find someone who stocks 1mm2 SWA, I assume due to cost no one uses it any longer as just  as cheap to get 1.5mm2.


re wiring with 1.5mm2 back from the rcd is not really an option, the cable is buried under concrete and having to re wire would mean drilling through the house and re laying a new cable?


so guess the short question is, anyone know of anyone selling 1mm2 SWA?


thank you all for your time and assistance.


Andy
Parents
  • 0
    Thanks guys.


    It is hugely frustrating! Volt drop isn’t an issue I’m using 20w leds.


    I’m more concerned about extending a lower rated cable, 1mm2 with a higher one of 1.5?


    I can’t imagine there being any issues but if there was, and you cannot account for Murphy’s law, then technically I could draw more than the 1mm should take?


    I should add that I don’t want to use 1mm but it is old circuitry from the sparky who lived here before me. 3 core, Red, blue, and yellow.


    Andy
Reply
  • 0
    Thanks guys.


    It is hugely frustrating! Volt drop isn’t an issue I’m using 20w leds.


    I’m more concerned about extending a lower rated cable, 1mm2 with a higher one of 1.5?


    I can’t imagine there being any issues but if there was, and you cannot account for Murphy’s law, then technically I could draw more than the 1mm should take?


    I should add that I don’t want to use 1mm but it is old circuitry from the sparky who lived here before me. 3 core, Red, blue, and yellow.


    Andy
Children
No Data

Join us to get the best from IET EngX.

Joining EngX lets you personalise your experience so you stay up to date on the topics that interest you, plus you’ll be able to make connections who are looking to collaborate, exchange ideas and more.

Join us Not now

Community Rules & Guidelines