Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 14 replies
  • Subscribers 32 subscribers
  • Views 1441 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Connecting up Sockets in either office or home

Former Community Member
Former Community Member
Hi All,

Was wondering best way to connect power to new set of 6 13A Double Sockets would it be best to use 63A RCD and 32A MCB with 2.5mm2 cable coming from MCB to the sockets I guess would you need 2 32A MCB's to have 3 sockets connected at any one time?.Then connect 16mm2 cable from the Main Power Source to the 63A RCD.The Power source consisting of 2x 4KVa Transformers and industrial sockets 110v,230v & 400v so Welders can work on the different floor levels (ie 2 Floors & Office on Ground).Also for lighting I assume its the same set up but with 6A MCB and 1.5mm2 Cable coming from the MCB.Jimmy
Parents
  • Former Community Member
    0 Former Community Member
    Well with it being a fabrication works the Welding machine maximum Power is 16kW there are two power cabinets on each side. I guess your going to say that the transformers need to be bigger?.
Reply
  • Former Community Member
    0 Former Community Member
    Well with it being a fabrication works the Welding machine maximum Power is 16kW there are two power cabinets on each side. I guess your going to say that the transformers need to be bigger?.
Children
No Data

Community Rules & Guidelines