This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Connecting up Sockets in either office or home

Former Community Member
Former Community Member
Hi All,

Was wondering best way to connect power to new set of 6 13A Double Sockets would it be best to use 63A RCD and 32A MCB with 2.5mm2 cable coming from MCB to the sockets I guess would you need 2 32A MCB's to have 3 sockets connected at any one time?.Then connect 16mm2 cable from the Main Power Source to the 63A RCD.The Power source consisting of 2x 4KVa Transformers and industrial sockets 110v,230v & 400v so Welders can work on the different floor levels (ie 2 Floors & Office on Ground).Also for lighting I assume its the same set up but with 6A MCB and 1.5mm2 Cable coming from the MCB.Jimmy
Parents
  • Jimmy says:

     
    I'm getting a better understanding of the transformers requirements they are for 110v only and the Welding Machinery just plugs directly into the 400v TP+N+E Socket that is on the Power Cubicle I was told they call these Power Cubicles are Power Cluster Units.

Reply
  • Jimmy says:

     
    I'm getting a better understanding of the transformers requirements they are for 110v only and the Welding Machinery just plugs directly into the 400v TP+N+E Socket that is on the Power Cubicle I was told they call these Power Cubicles are Power Cluster Units.

Children
No Data