Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 22 replies
  • Subscribers 32 subscribers
  • Views 2016 views
  • Users 0 members are here
Options
You may also be interested in
This discussion is locked.
You cannot post a reply to this discussion. If you have a question start a new discussion

Cable table which column to use

Baldyhugh
Hi


Im currently doing a bit of circuit design and am a bit rusty. I’m planning to use a 3 core swa for a single phase circuit. Do I choose the 2core cable single phase column in The regs book current capacity tables even though im using a three core cable or the three or four core cable column? Some of the tables show a little asterix denoting ‘with or without a protective conductor’ which would help in my instance, however table 4d4a doesn’t show this. 

Thanks in advance

Peter
Parents
  • 0
    HI Baldyhugh


    If you look at the columns on table 4D4A  - Reference method C for example - column 2 is for single phase AC (It says this at the top of the column) and the next column 3 says that it is for three phase. 


    Hope this helps ;-)


    Kind Regards

    Tatty
Reply
  • 0
    HI Baldyhugh


    If you look at the columns on table 4D4A  - Reference method C for example - column 2 is for single phase AC (It says this at the top of the column) and the next column 3 says that it is for three phase. 


    Hope this helps ;-)


    Kind Regards

    Tatty
Children
No Data

Join us to get the best from IET EngX.

Joining EngX lets you personalise your experience so you stay up to date on the topics that interest you, plus you’ll be able to make connections who are looking to collaborate, exchange ideas and more.

Join us Not now

Community Rules & Guidelines