Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 23 replies
  • Subscribers 32 subscribers
  • Views 1956 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Numerous Lights from one switch

Former Community Member
Former Community Member
Hi All I was wondering if using the attached diagram would this be a good design for switching on numerous number of lights in one switch. I assume it is in some form of daisy chain. Its the one that I have rung?.Jimmy

Required Lighting Circuit for one switch operation to light 12 lights at once.pdf
Parents
  • 0
    Depends on the type of lights you propose to use. But then most lights are now LEDs with electronic drivers with a considerable reduction in power consumption.

    The type of switch will depend on the power of the loads/lights to be switched. In this case 10-12 LED lamps should be adequately switched by a domestic 5,10 or 20A switch rating.

    Legh
Reply
  • 0
    Depends on the type of lights you propose to use. But then most lights are now LEDs with electronic drivers with a considerable reduction in power consumption.

    The type of switch will depend on the power of the loads/lights to be switched. In this case 10-12 LED lamps should be adequately switched by a domestic 5,10 or 20A switch rating.

    Legh
Children
No Data

Community Rules & Guidelines