Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 17 replies
  • Subscribers 32 subscribers
  • Views 1645 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Surge Protection & Inspection Intervals

PG
If it is considered that an unskilled person could not, safely, replace an SPD surge module;-

Should the recommended interval until the next inspection be shortened if an SPD is part of the Installation (to take into account the limited operating life of the SPD).

If so, are there any guides to the amount of interval reduction?


Regards

PG
Parents
  • 0
    MHRestorations:

    I like the SPD's where the 'flag' operates a set of volt free contacts for this exact reason. A bell transformer and a distinctive buzzer could complete the setup. Some enterprising manufacturer could make a self 'buzzing' SPD for when the industry as a whole starts to fit them routinely.


    Ditto that.

    I`ll bet nobody does though!


Reply
  • 0
    MHRestorations:

    I like the SPD's where the 'flag' operates a set of volt free contacts for this exact reason. A bell transformer and a distinctive buzzer could complete the setup. Some enterprising manufacturer could make a self 'buzzing' SPD for when the industry as a whole starts to fit them routinely.


    Ditto that.

    I`ll bet nobody does though!


Children
No Data

Community Rules & Guidelines