Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 18 replies
  • Subscribers 32 subscribers
  • Views 3293 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

VOLTAGE OPERATED ELCB BE842

Former Community Member
Former Community Member
Regarding voltage ELCB's BS842 I am currently looking at replacing an old Wylex fuse board with a new C.U with individual rcbo's system is TT. Question is if I remove the earth connections from this device can it be used as the isolator switch for the new CU?

Parents
  • 0
    I've not thought of adding surge protection as its a small domestic building.

    Unless it really is tiny (e.g. domestic outbuilding - where replacing the entire installation and appliances would cost less than 5x the cost of fitting the SPD) you really should be doing the risk assessment at least.

      - Andy.
Reply
  • 0
    I've not thought of adding surge protection as its a small domestic building.

    Unless it really is tiny (e.g. domestic outbuilding - where replacing the entire installation and appliances would cost less than 5x the cost of fitting the SPD) you really should be doing the risk assessment at least.

      - Andy.
Children
No Data

Community Rules & Guidelines