This discussion is locked.

You cannot post a reply to this discussion. If you have a question start a new discussion

Caravan RCD trip power connections

Dear all , a holiday question

I have an acquaintance who asks why his IET 18th Edition RCD tester when plugs it in to the Local RCD (<30mA/300mS) , the primary supply RCD trips (that is further up the AC supply line) , rather than the caravan’s, so in effect nullifying the test.

Is this because the Primary Supply RCD is monitoring a small standing current from other connections and the Local RCD needs to be tested by using the Local Earth at the unit ? ( which is not so easily accessible).

Are there any other thoughts please ?

Paul , Swindon LN IET.

Parents

0 AJJewsbury over 4 years ago

gkenyon:
Sparkingchip:
Something like this plus a 13 amp extension lead with a couple of 13 amp tester leads and the caravan RCD can be tested without tripping the site installation RCD.

Yes, I like that approach.

Or for a caravan that normally has a 16A BS EN 60309 maybe something like this: https://www.martencables.co.uk/product/marten-pce-230v-16a-plug-to-2-x-16a-sockets-2-way-y-splitter-2-5mm-ho7rn-f-cable/ - with a 16A to 13A adaptor on one outlet, or even substitute a 13A trailing socket.

- Andy.
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 AJJewsbury over 4 years ago

gkenyon:
Sparkingchip:
Something like this plus a 13 amp extension lead with a couple of 13 amp tester leads and the caravan RCD can be tested without tripping the site installation RCD.

Yes, I like that approach.

Or for a caravan that normally has a 16A BS EN 60309 maybe something like this: https://www.martencables.co.uk/product/marten-pce-230v-16a-plug-to-2-x-16a-sockets-2-way-y-splitter-2-5mm-ho7rn-f-cable/ - with a 16A to 13A adaptor on one outlet, or even substitute a 13A trailing socket.

- Andy.
Cancel
Vote Up 0 Vote Down

Cancel

Children

No Data

Caravan RCD trip power connections

Join us to get the best from IET EngX.

Community Rules & Guidelines