Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 22 replies
  • Subscribers 32 subscribers
  • Views 12860 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Bonding both sides of an swa cable

MrJack96
Is it necessary to bond both sides of an armoured cable if it’s not being used as a CPC and if you bond it at the supply side of an electrical motor starter panel is there anything in the regs where it should be bonded too or can it just be bolted to the chassis stud using a 6mm fly lead off the gland. 


thanks for your help in advance guys.
Parents
  • 0
    Why’s it not classed as bonding sorry I’m just confused. I know if I used the armour as a cpc it would be earthing
Reply
  • 0
    Why’s it not classed as bonding sorry I’m just confused. I know if I used the armour as a cpc it would be earthing
Children
No Data

Community Rules & Guidelines