Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 22 replies
  • Subscribers 32 subscribers
  • Views 12877 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Bonding both sides of an swa cable

MrJack96
Is it necessary to bond both sides of an armoured cable if it’s not being used as a CPC and if you bond it at the supply side of an electrical motor starter panel is there anything in the regs where it should be bonded too or can it just be bolted to the chassis stud using a 6mm fly lead off the gland. 


thanks for your help in advance guys.
Parents
  • 0
    What is the requirements when your feeding from a MCC through JBs to a local isolator.(if it’s been earthed at the MCC) I see continuity kept by linking all the armours together (daisy chaining) usually in the junction boxes or isolators but not sure what good practice should be used.
Reply
  • 0
    What is the requirements when your feeding from a MCC through JBs to a local isolator.(if it’s been earthed at the MCC) I see continuity kept by linking all the armours together (daisy chaining) usually in the junction boxes or isolators but not sure what good practice should be used.
Children
No Data

Community Rules & Guidelines