The IET is carrying out some important updates between 17-30 April and all of our websites will be view only. For more information, read this Announcement

Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 33 replies
  • Subscribers 31 subscribers
  • Views 4326 views
  • Users 0 members are here
Options
You may also be interested in
This discussion is locked.
You cannot post a reply to this discussion. If you have a question start a new discussion

elcb and borehole pump

Former Community Member
Former Community Member
Hello

I have a problem with a newly installed domestic borehole pump. This is to replace the original pump which after 20 years has given up the ghost.

The pump appears to operate satisfactorily except that it trips the consumer unit elcb on starting and only on starting. Resetting the elcb allows the pump to run normally. The time taken to push the elcb switch back up is presumably sufficient for some transient effect to end.


The house wiring is exactly the same as for the original pump, which ran satisfactorily for 20 years.


The installer has carried out all the tests normally conducted on the pump and pump cable (continuity, insulation, running current, etc.) and claims that the pump is not faulty. Yet it trips the elcb on startup.


I will welcome any suggestions for a solution. The installer is a one man firm and is reluctant (to say the least) to change the pump.


Mike Lee
Parents
  • 0


    The bore hole engineer should have put the label with the details of the pump on the controller so you should have the details of what is down the hole and everything else should be visible , fo you should be able to post photos of the pump label, the controller and consumer unit showing the breakers. 
    48d264fe243ea5a7884e07277d850ff6-original-20200530_163019.jpg
Reply
  • 0


    The bore hole engineer should have put the label with the details of the pump on the controller so you should have the details of what is down the hole and everything else should be visible , fo you should be able to post photos of the pump label, the controller and consumer unit showing the breakers. 
    48d264fe243ea5a7884e07277d850ff6-original-20200530_163019.jpg
Children
No Data

Join us to get the best from IET EngX.

Joining EngX lets you personalise your experience so you stay up to date on the topics that interest you, plus you’ll be able to make connections who are looking to collaborate, exchange ideas and more.

Join us Not now

Community Rules & Guidelines