This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Extraction fan in a bathroom

Former Community Member
Former Community Member
I have limited areas my fan can go. It is going to have be wall mount at the other end of my bath/shower head. My consumer unit is 30mA RCD protected. 


I have found a fan 

MONSOON ZONE 1 SILENCE TIMED EXTRACTOR FAN MON-S100T




it is main powered, I can’t do a 12v as there is No where the transformer can go.


is the monsoon okay to use? It says zone 1? 


Parents
  • geoffsd:

    Another 62 pages of guidance; what are the actual regulations?


    As above, the regulations just call for "adequate" ventilation. So (where building regs apply) simply choosing not to provide any means of ventilation isn't an option. The next question is what is "adequate" - here the guidance documents (AD F and the DFCG) are useful as they set the bar of what is likely to be considered adequate. While you're free to choose some other approach if you prefer, if it doesn't perform as well (or is less convenient to use properly) as the approaches suggested, then you're unlikely to have met the 'adequate' requirement.


       - Andy.


Reply
  • geoffsd:

    Another 62 pages of guidance; what are the actual regulations?


    As above, the regulations just call for "adequate" ventilation. So (where building regs apply) simply choosing not to provide any means of ventilation isn't an option. The next question is what is "adequate" - here the guidance documents (AD F and the DFCG) are useful as they set the bar of what is likely to be considered adequate. While you're free to choose some other approach if you prefer, if it doesn't perform as well (or is less convenient to use properly) as the approaches suggested, then you're unlikely to have met the 'adequate' requirement.


       - Andy.


Children
No Data