The IET is carrying out some important updates between 17-30 April and all of our websites will be view only. For more information, read this Announcement

This discussion is locked.
You cannot post a reply to this discussion. If you have a question start a new discussion

Mixed manufacturer devices in din rail enclosure.What code?

Have found out a catering company,I deal with fit servery counters in supermarkets and use Schnieder din rail

enclosures,3 pole main switch, 3 phase bus bar,and a different brand of mcb/rcbo.I assume this is wrong and wondered

what code it could attract on a condition report?If I constucted the unit using all Schnieder parts,would the unit still

have to be type tested by others?

                                              Regards,

                                                         Hz
Parents
  • As a point of interest, has this type of case ever been tested in the Law courts?

    The manufacterers state you can't mix different companies components together in the same enclosure although You might not be able to avoid this when using SPDs and AFDDs with MCBs etc

    The BS7671 book of guidance states you should follow manufacturer's guidelines.

    It strikes me that there is no legal president that has been established for this type of situation.

    Legh
Reply
  • As a point of interest, has this type of case ever been tested in the Law courts?

    The manufacterers state you can't mix different companies components together in the same enclosure although You might not be able to avoid this when using SPDs and AFDDs with MCBs etc

    The BS7671 book of guidance states you should follow manufacturer's guidelines.

    It strikes me that there is no legal president that has been established for this type of situation.

    Legh
Children
No Data