The IET is carrying out some important updates between 17-30 April and all of our websites will be view only. For more information, read this Announcement

Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 16 replies
  • Subscribers 31 subscribers
  • Views 2249 views
  • Users 0 members are here
Options
You may also be interested in
This discussion is locked.
You cannot post a reply to this discussion. If you have a question start a new discussion

Mixed manufacturer devices in din rail enclosure.What code?

hertzal123
Have found out a catering company,I deal with fit servery counters in supermarkets and use Schnieder din rail

enclosures,3 pole main switch, 3 phase bus bar,and a different brand of mcb/rcbo.I assume this is wrong and wondered

what code it could attract on a condition report?If I constucted the unit using all Schnieder parts,would the unit still

have to be type tested by others?

                                              Regards,

                                                         Hz
Parents
  • 0
    Whilst there is no doubting the above comments, it appears that you are looking at this from a periodic inspection perspective. Thus compliance with BS7671 or any other standard is not necessarily an issue. If you determine that the assembly is unsafe or could become unsafe in some way then a code is appropriate. If, on the other hand, you do not see any obvious safety issue, depending on the purpose of your inspection, you might either call attention to the issue or simply disregard it.
Reply
  • 0
    Whilst there is no doubting the above comments, it appears that you are looking at this from a periodic inspection perspective. Thus compliance with BS7671 or any other standard is not necessarily an issue. If you determine that the assembly is unsafe or could become unsafe in some way then a code is appropriate. If, on the other hand, you do not see any obvious safety issue, depending on the purpose of your inspection, you might either call attention to the issue or simply disregard it.
Children
No Data

Join us to get the best from IET EngX.

Joining EngX lets you personalise your experience so you stay up to date on the topics that interest you, plus you’ll be able to make connections who are looking to collaborate, exchange ideas and more.

Join us Not now

Community Rules & Guidelines