Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 5 replies
  • Subscribers 32 subscribers
  • Views 719 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Hex head or some head bolts for trunking

Baldyhugh
Hi


Im currently nearing completion of a steel trunking job and was looking for some advice. The 3x3 steel trunking is fixed on top of unistrut running perpendicular to it at regular intervals. I used M10 zebedees and hex head bolts for this. I now wondered if I should have used dome head bolts instead for the same reason as M6 dome head bolts are used to bolt the trunking together - to protect the cable. Was just wondering what others use in this circumstance


Thanks
Parents
  • 0
    Thanks OMS


    Thankfully there aren’t many circuits in the trunking however who knows what may be added over time. I think I’ve found some M10 dome head bolts that tighten with an Allen key after a bit of googling so for peace of mind I might replace the hex head bolts with these


    Thanks for your reply


    Peter
Reply
  • 0
    Thanks OMS


    Thankfully there aren’t many circuits in the trunking however who knows what may be added over time. I think I’ve found some M10 dome head bolts that tighten with an Allen key after a bit of googling so for peace of mind I might replace the hex head bolts with these


    Thanks for your reply


    Peter
Children
No Data

Community Rules & Guidelines