This discussion is locked.
You cannot post a reply to this discussion. If you have a question start a new discussion

Surface mounted pvc conduit nail clips

Hi all


A lot of my work involves surface mounted pvc conduit and in particular fixing to wooden roof beams in agricultural buildings for high level lights. I have normally used the plastic cable nail clips for this as they easily and quickly fix to the wood. I would use spacer bar saddles for fixing to a masonry wall. However, as the clips are specifically called cable clips, should they only be used for cable, not conduit? I have to say that they work very well for conduit and especially when fixing to a wooden surface
Parents
  • setting aside the fire regulations as my example of a farm shed wouldn’t constitute an escape route?

    I don't think you can ignore 521.10.202 - the escape route bit was dropped with the 18th so the no premature collapse requirement now applies to all wiring systems whereever they are. (Even back in the 17th AMD3, BS 7671's definition of an escape route was pretty wide and would start just about anywhere where people (and perhaps animals too) might be present when a fire broke out).

       - Andy.
Reply
  • setting aside the fire regulations as my example of a farm shed wouldn’t constitute an escape route?

    I don't think you can ignore 521.10.202 - the escape route bit was dropped with the 18th so the no premature collapse requirement now applies to all wiring systems whereever they are. (Even back in the 17th AMD3, BS 7671's definition of an escape route was pretty wide and would start just about anywhere where people (and perhaps animals too) might be present when a fire broke out).

       - Andy.
Children
No Data