Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 11 replies
  • Subscribers 32 subscribers
  • Views 1168 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Measuring peak power for rating plate

M. Joshi
I would like to measure the peak power drawn by various pieces of equipment individually so that the figure can be shown on each equipment's rating plate.


I'm considering using the peak demand function on a MID power meter but, using 0.5s/0.2s CTs instead for better accuracy.  Is this approach acceptable?
Parents
  • 0
    If you want to estimate the inrush for a halogen lamp, measure the resistance with  a meter when cold, and expect to see about 10% of the resistance when hot.
Reply
  • 0
    If you want to estimate the inrush for a halogen lamp, measure the resistance with  a meter when cold, and expect to see about 10% of the resistance when hot.
Children
No Data

Community Rules & Guidelines