Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 11 replies
  • Subscribers 32 subscribers
  • Views 1168 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Measuring peak power for rating plate

M. Joshi
I would like to measure the peak power drawn by various pieces of equipment individually so that the figure can be shown on each equipment's rating plate.


I'm considering using the peak demand function on a MID power meter but, using 0.5s/0.2s CTs instead for better accuracy.  Is this approach acceptable?
Parents
  • 0
    Many thanks for your reply Graham.  Both the BS EN 60204-1 and BS EN 61010-1 would apply to the system.


    Is there any guidance on the type of meter to use for the peak power measurement?


    I'm considering RI-F500 power meters (RI-F500.pdf) with 0.5s CTs, and using the peak demand logging function with all system modes operated?
Reply
  • 0
    Many thanks for your reply Graham.  Both the BS EN 60204-1 and BS EN 61010-1 would apply to the system.


    Is there any guidance on the type of meter to use for the peak power measurement?


    I'm considering RI-F500 power meters (RI-F500.pdf) with 0.5s CTs, and using the peak demand logging function with all system modes operated?
Children
No Data

Community Rules & Guidelines