The IET is carrying out some important updates between 17-30 April and all of our websites will be view only. For more information, read this Announcement

Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 5 replies
  • Subscribers 31 subscribers
  • Views 2860 views
  • Users 0 members are here
Options
You may also be interested in
This discussion is locked.
You cannot post a reply to this discussion. If you have a question start a new discussion

Labelling conventions

Johno12345
I was reading Tomgunns post about separating 3 phase areas and it made me think of my latest project to fill some of the quiet times at the facility where I work


I have been labelling our my final distribution, and to make room, I have been removing all the old labels and putting new ones on, to a standard convention.


the amount of 3phase sockets that have Danger 400V on them is surprising. I have been labelling them with the slightly more useful 3ph&e or 3ph&N&E


also finding things with 400V between ---> on them


things labelled "Supplied from L7" on 3 phase boards in a factory with over 100 boards, oh, and we have, so far 14 DB/A and at least 8 "Main DB"


Identifying and labelling the main distribution is easy, but the final is a lot more time consuming than I was expecting. 


I'm talking about new labels by the way, in the last sort of ten years. There is one light switch that is fed from six separate fuses, 3 phases that has the original traffolyte label that looks to be dating from the 70s, I left that in place


not much point to the post, but do you have any conventions for labelling, information that is useful that you think people miss?


Ill reveal my convention after my coffee!
Parents
  • 0
    Well done for labeling - an essential part of safety as well as being a good investment so you can quickly know where to go when something has tripped.

    The first requirement,is to label all your BDs in some sensible way then a label like DB1 1L1 should suffice, as long as it is clear when you go to DB1 which MCB is 1L1.

    I was on one job where I persuaded the contractor to give a labeling machine to every test spark so that the outlets could be labelled as they were tested. All went well until he increased the number of test sparks but didn't buy more labeling machines. The contractor then sent another spark round to do the labeling who picked up the wrong drawing and all was a major shambles when the client did a random test and found that the labeling was wrong.

    I still think it is a major failing that board manufacturers are not required to provide labels, even if they need to provide several different options in the form of self adhesive plastic.
Reply
  • 0
    Well done for labeling - an essential part of safety as well as being a good investment so you can quickly know where to go when something has tripped.

    The first requirement,is to label all your BDs in some sensible way then a label like DB1 1L1 should suffice, as long as it is clear when you go to DB1 which MCB is 1L1.

    I was on one job where I persuaded the contractor to give a labeling machine to every test spark so that the outlets could be labelled as they were tested. All went well until he increased the number of test sparks but didn't buy more labeling machines. The contractor then sent another spark round to do the labeling who picked up the wrong drawing and all was a major shambles when the client did a random test and found that the labeling was wrong.

    I still think it is a major failing that board manufacturers are not required to provide labels, even if they need to provide several different options in the form of self adhesive plastic.
Children
No Data

Join us to get the best from IET EngX.

Joining EngX lets you personalise your experience so you stay up to date on the topics that interest you, plus you’ll be able to make connections who are looking to collaborate, exchange ideas and more.

Join us Not now

Community Rules & Guidelines