Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 6 replies
  • Subscribers 32 subscribers
  • Views 592 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Pulsing LED Strip on dimmer?

whjohnson
Fitted some IP rated LED strip in a bathroom controlled by a dimmer. When turned right down to low level, the led strip pulses dim/bright.

Strip is Aurora/Eternal, approx 3 metres in total and is supplied via a Aurora EN-LEDD7512 Triac LED driver rated at 75W max. This is controlled by a Varilight GPJJ100W dimmer switch which is supposedly programmable. Tried the methods described in the dimmer switich installation instructions but no joy.

Any ideas?
Parents
  • 0
    And if not have a root round for an older style dimmer. Quite often the giblets are transferrable between fittings,  as they are a single hole fixing in the faceplate. There is almost universal agreement between makers on the hole size, though not the thread on the locknuts.
Reply
  • 0
    And if not have a root round for an older style dimmer. Quite often the giblets are transferrable between fittings,  as they are a single hole fixing in the faceplate. There is almost universal agreement between makers on the hole size, though not the thread on the locknuts.
Children
No Data

Community Rules & Guidelines