Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 6 replies
  • Subscribers 32 subscribers
  • Views 591 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Pulsing LED Strip on dimmer?

whjohnson
Fitted some IP rated LED strip in a bathroom controlled by a dimmer. When turned right down to low level, the led strip pulses dim/bright.

Strip is Aurora/Eternal, approx 3 metres in total and is supplied via a Aurora EN-LEDD7512 Triac LED driver rated at 75W max. This is controlled by a Varilight GPJJ100W dimmer switch which is supposedly programmable. Tried the methods described in the dimmer switich installation instructions but no joy.

Any ideas?
Parents
  • 0
    Thanks Mike.

    The Aurora Enlite EN-LEDD7512 driver is a triac constant voltage model and the link to the LED strip (part no Aurora Enlite ST100IP) states that it requires a12VDC Constant voltage supply. The wholesaler said that the Aurora catalogue states that the driver model is compatible with the strip.

    No mention of compatible dimmer types though.

    Will try mode 2 on the switch first, then if no good, will have to try a VCOM type switch instead.
Reply
  • 0
    Thanks Mike.

    The Aurora Enlite EN-LEDD7512 driver is a triac constant voltage model and the link to the LED strip (part no Aurora Enlite ST100IP) states that it requires a12VDC Constant voltage supply. The wholesaler said that the Aurora catalogue states that the driver model is compatible with the strip.

    No mention of compatible dimmer types though.

    Will try mode 2 on the switch first, then if no good, will have to try a VCOM type switch instead.
Children
No Data

Community Rules & Guidelines