Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 6 replies
  • Subscribers 32 subscribers
  • Views 589 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Pulsing LED Strip on dimmer?

whjohnson
Fitted some IP rated LED strip in a bathroom controlled by a dimmer. When turned right down to low level, the led strip pulses dim/bright.

Strip is Aurora/Eternal, approx 3 metres in total and is supplied via a Aurora EN-LEDD7512 Triac LED driver rated at 75W max. This is controlled by a Varilight GPJJ100W dimmer switch which is supposedly programmable. Tried the methods described in the dimmer switich installation instructions but no joy.

Any ideas?
Parents
  • 0
    Ok, Update time.

    Raised a ticket directly with Aurora tech support, who responded with a suggestion that the load presented to the switch may be too small for it to work effectively, so then raised another ticket with Varilight tech support, who responded with a suggestion that I replace the switch with one suited for driving triac-based led drivers from their VCOM range.

    Many thanks for your input.
Reply
  • 0
    Ok, Update time.

    Raised a ticket directly with Aurora tech support, who responded with a suggestion that the load presented to the switch may be too small for it to work effectively, so then raised another ticket with Varilight tech support, who responded with a suggestion that I replace the switch with one suited for driving triac-based led drivers from their VCOM range.

    Many thanks for your input.
Children
No Data

Community Rules & Guidelines