Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 15 replies
  • Subscribers 32 subscribers
  • Views 2168 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Fixed diesel generator earthing

D4G
Hi folks, i'm after your knowledge again!


I have a 184KW diesel generator which is to supply a test bay for testing machines to big for the building supply.  The generated supply will not be used/connected to the building supply.

Would the earthing arrangements be as TT with a rod at the generator connected to the neutral/star connection?


Thanks in advance ?
Parents
  • 0
    Equipment being tested is generally screw compressors,

    Test area is just a section of an industrial unit, so inside on a concrete floor, Brick walls so no exposed metalwork, water supply is non conductive.

    Generator is outside the other side of the wall...
Reply
  • 0
    Equipment being tested is generally screw compressors,

    Test area is just a section of an industrial unit, so inside on a concrete floor, Brick walls so no exposed metalwork, water supply is non conductive.

    Generator is outside the other side of the wall...
Children
No Data

Community Rules & Guidelines