This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Fixed diesel generator earthing

Hi folks, i'm after your knowledge again!

I have a 184KW diesel generator which is to supply a test bay for testing machines to big for the building supply. The generated supply will not be used/connected to the building supply.

Would the earthing arrangements be as TT with a rod at the generator connected to the neutral/star connection?

Thanks in advance ?

Parents

0 jcm over 4 years ago

jcm:

HSE leaflet on Generators (No update ) but still relevant.
OC 482/2: Electrical safety of independent low-voltage ac

www.hse.gov.uk/.../oc482_2.htm

Leaflet on Neutral inversion (No update) since 1936 (In your case original posters question only for a read )

Published in: Journal of the Institution of Electrical Engineers ( Volume: 78 , Issue: 471 , March 1936 )

Page(s): 317 - 325

Date of Publication: March 1936

DOI: 10.1049/jiee-1.1936.0051

Publisher: IET

ieeexplore.ieee.org/.../5317048
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 jcm over 4 years ago

jcm:

HSE leaflet on Generators (No update ) but still relevant.
OC 482/2: Electrical safety of independent low-voltage ac

www.hse.gov.uk/.../oc482_2.htm

Leaflet on Neutral inversion (No update) since 1936 (In your case original posters question only for a read )

Published in: Journal of the Institution of Electrical Engineers ( Volume: 78 , Issue: 471 , March 1936 )

Page(s): 317 - 325

Date of Publication: March 1936

DOI: 10.1049/jiee-1.1936.0051

Publisher: IET

ieeexplore.ieee.org/.../5317048
Cancel
Vote Up 0 Vote Down

Cancel

Children

No Data

Fixed diesel generator earthing

OC 482/2: Electrical safety of independent low-voltage ac

OC 482/2: Electrical safety of independent low-voltage ac

Community Rules & Guidelines