A major player in the EVSE market has kindly consented to provide some technical training for the electrical installation tutors at a training centre where I often tutor part-time. I imagine it is not entirely motivated by altruistic considerations but at least it gives an opportunity for the tutors and myself to get some kind of grasp on the various products on offer and where this particular manufacturer sees the direction of travel for EVSE. I am already aware that the company is moving away from products that rely on the installation of earth electrodes in PME situations and are placing considerable focus on load management. Is there any particular question that you would ask them given the opportunity?
Hi, I would be asking exactly which indent of 722.411.4.1 their O-PEN device/technology complies with, and if it works in ALL cases of a broken PEN conductor. Then how a designer/installer ensures that they are themselves complying with BS7671 if the device/technology has no product standard?
table 5.2 of C.O.P has some BS EN numbers to check for but does complying with one or more of these satisfy indent iii iv or v?
A few contributors on here will likely help with this?
Maybe this is something I’ve missed and is straight forward??
Hi, I would be asking exactly which indent of 722.411.4.1 their O-PEN device/technology complies with, and if it works in ALL cases of a broken PEN conductor. Then how a designer/installer ensures that they are themselves complying with BS7671 if the device/technology has no product standard?
table 5.2 of C.O.P has some BS EN numbers to check for but does complying with one or more of these satisfy indent iii iv or v?
A few contributors on here will likely help with this?
Maybe this is something I’ve missed and is straight forward??
