Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 15 replies
  • Subscribers 32 subscribers
  • Views 1215 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

ESF petition: 'dangerous electricals on online marketplaces'

Nathaniel
https://www.electricalsafetyfirst.org.uk/stop-the-sale-of-dangerous-electrical-goods-on-online-marketplaces 

"Stop the sale of dangerous electricals on online marketplaces:  In the UK, online marketplaces such as Amazon, eBay and Wish are not bound to the same laws as traditional retailers. ..."


I don't usually sign petitions, but this is a subject I've thought of many times when seeing equipment that's imported from far-off sellers with the help and profit of online marketplaces that claim to be UK ones. It may look good and do its main task adequately, but a little time or closer inspection often shows big problems for safety: lack of isolation clearance between the mains and output of chargers, solder joints that break and arc at the input socket, wires that split in weeks, hideous RF emissions, wires with a small proportion of the actual copper area that they state on the sheath, etc, etc.  I feel doubtful whether ESF will reach its 100 000 target anyway, but perhaps some others here can be interested to support them in this attempt. 

Parents
  • 0
    And when purchasing goods from fleabay or other doubtful sources for my own use, I adopt a cautious approach to use.

    Items with a plug top power supply, I avoid plugging in directly to fixed sockets. An extension lead with a 3 amp fuse in the plug is safer than a 30/32 amp OCPD.

    Items claimed to be double insulated are always used via DUPLICATED RCDs

    And I tend to assume that electrical ratings are in chinese watts or amps.

    "13 amp" extension leads, never load to more than 10 amps short term, or 6 amps long term.

    "100 watt" switch mode power supply, avoid exceeding 60 watts.

    If I need an extension lead for a full 13 amps, I would make one with 1.5mm flex, (not 1.25) and an MK safety plug, and a good quality 13 amp socket mounted on a piece of wood.

    And I would test the flex with a 15 amp load to make certain that it gets only very slightly warm.
Reply
  • 0
    And when purchasing goods from fleabay or other doubtful sources for my own use, I adopt a cautious approach to use.

    Items with a plug top power supply, I avoid plugging in directly to fixed sockets. An extension lead with a 3 amp fuse in the plug is safer than a 30/32 amp OCPD.

    Items claimed to be double insulated are always used via DUPLICATED RCDs

    And I tend to assume that electrical ratings are in chinese watts or amps.

    "13 amp" extension leads, never load to more than 10 amps short term, or 6 amps long term.

    "100 watt" switch mode power supply, avoid exceeding 60 watts.

    If I need an extension lead for a full 13 amps, I would make one with 1.5mm flex, (not 1.25) and an MK safety plug, and a good quality 13 amp socket mounted on a piece of wood.

    And I would test the flex with a 15 amp load to make certain that it gets only very slightly warm.
Children
No Data

Community Rules & Guidelines