My question is if you’ve got a lighting circuit and you ad addition loads to the circuit will this always trip the breaker if you add too much load on a circuit?
The use of DMX led lighting for theatres probably makes using 13A plugs a good idea, and they are considerably cheaper than alternatives. These fittings just need mains power and a DMX control cable which is looped through, so it maakes sense to do the same with the mains and 2 socket extension leads between fixtures. The most expensive part is often Neutric mains connectors on the fixtures themselves.
The use of DMX led lighting for theatres probably makes using 13A plugs a good idea, and they are considerably cheaper than alternatives. These fittings just need mains power and a DMX control cable which is looped through, so it maakes sense to do the same with the mains and 2 socket extension leads between fixtures. The most expensive part is often Neutric mains connectors on the fixtures themselves.
