Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 17 replies
  • Subscribers 31 subscribers
  • Views 3160 views
  • Users 0 members are here
Options
You may also be interested in
This discussion is locked.
You cannot post a reply to this discussion. If you have a question start a new discussion

Determining device designation of rewirable fuses

Farmboy
Table 3.1 of GN6 lists the rated short cct capacity for three BS 3036 device designations (S1A, S2A & S4A). But how do you determine the designation of the device?


On a different note, on an eicr, would you give a C2 to a size that was lower than the PEFC or PSCC at the point of use? I've looked in BPG4 and codebreakers but couldn't see anything relating specifically to breaking capacity (sorry if I've missed it).


F
Parents
  • 0
    Of course you wouldn't wear your best or even second-best flat 'at to work, nor your bowls one.


    Nowadays you have quite a decision to make - do I put it on top of, or under my Bob the Builder hard hat? ?
Reply
  • 0
    Of course you wouldn't wear your best or even second-best flat 'at to work, nor your bowls one.


    Nowadays you have quite a decision to make - do I put it on top of, or under my Bob the Builder hard hat? ?
Children
No Data

Join us to get the best from IET EngX.

Joining EngX lets you personalise your experience so you stay up to date on the topics that interest you, plus you’ll be able to make connections who are looking to collaborate, exchange ideas and more.

Join us Not now

Community Rules & Guidelines