Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 26 replies
  • Subscribers 32 subscribers
  • Views 4270 views
  • Users 0 members are here
Options
You may also be interested in
This discussion is locked.
You cannot post a reply to this discussion. If you have a question start a new discussion

EICR Certification DNO Fuse

Chivers
What are peoples thoughts on completing Certificates with regards to DNO fuses.


When you complete a Certificate Technically you do not remove the DNO Cut out fuse so you do not know 100% what the Fuse size is so would you personally put the fuse down as a 1362 type 2 and note down the rating advised by the Supplier or put this down as a Limitation? Up to this week I had normally put the rating as Written on the Fuse carrier by the DNO so 100A = 100A , 80a = 80a etc... I test the ZE/ZS at the closest place to the Suppliers cut out & note this down as the EFLI.


A colleague of mine has recently been "critical" of this stating we should be putting it down as a limitation as we can not guarantee the fuse is exactly what it says on the carrier.
Parents
  • 0
    You shouldn't be asked to put down a value at all. You cannot know, even if the label says 60A or whatever. Put N/A, as you cannot legally find out. If asked the DNO will probably say 60A, as this seems to be the current fitment. Does it matter? The answer is no.
Reply
  • 0
    You shouldn't be asked to put down a value at all. You cannot know, even if the label says 60A or whatever. Put N/A, as you cannot legally find out. If asked the DNO will probably say 60A, as this seems to be the current fitment. Does it matter? The answer is no.
Children
No Data

Join us to get the best from IET EngX.

Joining EngX lets you personalise your experience so you stay up to date on the topics that interest you, plus you’ll be able to make connections who are looking to collaborate, exchange ideas and more.

Join us Not now

Community Rules & Guidelines