LED lighting cable calcs

Baldyhugh over 3 years ago

Hi all

when calculating cable size for an LED lighting circuit is there a multiplication factor to be applied like the 1.8 for the old fluorescent lighting? I’m aware of the high inrush currents of led fittings but what I understand of this it is of such short duration that it only affects the curve rating of the mcb selection. I have a couple of 150 disco Lowbays to fit in a warehouse and would appreciate some advice.

many thanks

Parents

0 Former Community Member over 3 years ago

Hi Hugh, on a recent job I had 11 of 100W led floods and 12 of 50W led floods, out of interest I temporarily put them all together on one switch and they started up fine on a B6 MCB. They are now on multiple circuits/switches.

Hope this helps! :)
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 Former Community Member over 3 years ago

Hi Hugh, on a recent job I had 11 of 100W led floods and 12 of 50W led floods, out of interest I temporarily put them all together on one switch and they started up fine on a B6 MCB. They are now on multiple circuits/switches.

Hope this helps! :)
Cancel
Vote Up 0 Vote Down

Cancel

Children

No Data

Join us to get the best from IET EngX.

Joining EngX lets you personalise your experience so you stay up to date on the topics that interest you, plus you’ll be able to make connections who are looking to collaborate, exchange ideas and more.

LED lighting cable calcs

Join us to get the best from IET EngX.

Community Rules & Guidelines